The "Monitoring Standard Plus" vehicle tracking kit offers a comprehensive solution for effective vehicle monitoring. It enables you to quickly and efficiently obtain information about the location of vehicles in the field. It stands out for its low costs, making it both comprehensive and complete. This type of GPS tracking is also very easy to install, requiring only the connection of power cables and the ignition cable. This can be done independently or entrusted to any electrical workshop.
What the Monitoring Standard Plus kit includes
- The subscription covers all system maintenance costs
- Own support centre providing technical assistance
- In-house manufactured GPS trackers ensuring stable operation
- Easy installation of GPS trackers through a network of authorised partners
- Geographical location information
- Access to vehicle route history
- Vehicle operating time history
- Email or SMS notifications of events
- Vehicle speed and route chart
- Availability of historical data
- Reports in HTML, Excel and Word formats
- Current vehicle status (driving/stopped/garage)
- Email or SMS notifications on entering or leaving a defined zone
- User POI points
- Sending reports to an email address
- Advanced route visualisation algorithm (does not cut corners)
- Resistance to GPS signal jamming
- Large internal memory for up to 48,000 events
- GPS antenna disconnection alarm
- EcoDriving based on 3D sensors
- Up to 5 temperature sensors
- Driver identification based on RFID
- Vehicle security functions against unauthorised access
- Compliance with the SENT-GEO system
- Compliance with the eToll system
S8.2 tracker
The S8.2 tracker is a device designed and manufactured in Poland. The device features a GSM modem with a SIM card for data transmission and a GPS module.
The tracker has the following features
- GSM/GPRS modem: 850/900/1800/1900 MHz SIMCOM/QUECTEL with JAMMING function
- 3G (Global) / LTE-M (Global) Quectel modem
- Quectel L70 GPS receiver with ANTI-JAMMING function
- Internal battery for continuous real-time clock (RTC) backup
- Retention of key device operating parameters: time, GPS data – data is never lost – even after power loss!
- Advanced analogue input filters (analogue floats, fuel level probes) with data retention after main power loss
- RS-232-TTL communication port
- Internal 550 mAh battery (optional); Charging control
- External active GPS antenna (3 metres/SMA connector)
- External quad-band GSM antenna (3 metres/SMA-RP connector)
- ABS housing: 89x63x30 [mm]
- Archive memory – minimum 24,000 events (up to 48,000)
- LED indicators showing GSM signal strength and number of GPS satellites
- Full support for 1-Wire DALLAS protocol (6 thermometers, DALLAS/RFID identification)
- GPS antenna disconnection alarm – real-time monitoring
- Full support for Mobileye technology
- Full support for MDAS MOVON solutions
- Proprietary device input protection (power supply, ignition signal input, analogue inputs) – these inputs are resistant to damage (e.g. power surges in the vehicle installation)
- Incremental firmware – backwards compatible, always containing all device functions, ensuring easy software version management; Update files are delivered directly to the partner for further updating via FTP server
- Optional 3D sensor support for detecting accidents, towing, parking collisions
- ImmoDALLAS – additional security for the client’s vehicle; The device activates the output if unauthorised access is detected (DALLAS and RFID); The device can store up to 256 driver identification numbers!
- Ignition signal detection via dedicated analogue input or main power voltage
- Possibility to connect Garmin navigation via RS-232 to RS-232-TTL signal converter