This version of the system offers the most comprehensive solution for effective vehicle tracking and fleet management. It combines all available functions of our system. It allows you to quickly and efficiently obtain information about the location of vehicles in the field. Additionally, it enables monitoring of fuel level in the tank and engine operating parameters such as RPM or accelerator pedal position. This makes it easy to assess the driver's driving style.
What the Monitoring CAN E kit includes
- The subscription covers all system maintenance costs
- Own support centre providing technical assistance
- In-house manufactured GPS trackers ensuring stable operation
- Easy installation of GPS trackers through a network of authorised partners
- Reading data from the CAN bus
- Fuel level monitoring in the tank
- EcoDriving reports allowing assessment of driving efficiency
- Email and SMS notifications of fuel loss or refuelling
- Monitoring of up to 2 fuel level probes
- Temperature monitoring in the cargo area
- Geographical location information
- Access to vehicle route history
- Vehicle operating time history
- Email or SMS event notifications
- Speed and route chart of the vehicle
- Availability of historical data
- Reports in HTML, Excel and Word formats
- Current vehicle status (driving/stopped/garage)
- Email or SMS notifications of entry or exit from a defined zone
- User POI points
- Sending reports to an email address
- Advanced route visualisation algorithm (does not cut corners)
- Resistance to GPS signal jamming
- Large internal memory for up to 48,000 events
- GPS antenna disconnection alarm
- EcoDriving based on 3D sensors
- Up to 5 temperature sensors
- Driver identification based on RFID
- Vehicle security features against unauthorised access
- Compliance with the SENT-GEO system
- Compliance with the eToll system
S3 v.350 tracker
The S3 tracker is a device designed with attention to detail. The device features a GSM modem with a SIM card for data transmission and a GPS module.
The tracker has the following features
- GSM/GPRS modem: 850/900/1800/1900 MHz SIMCOM/QUECTEL with JAMMING function
- Quectel LTE modem
- Quectel GPS receiver with ANTI-JAMMING function
- Retention of key device operating parameters: time, GPS data – data is never lost – even after power loss!
- Advanced analogue input filters (analogue floats, fuel level probes) with data retention after main power loss
- RS-232-TTL communication port
- Internal 180 mAh battery
- Internal active GPS antenna
- Internal quad-band GSM antenna
- ABS housing
- Archive memory – minimum 10,000 events
- LED indicators for GSM signal strength and number of GPS satellites
- GPS antenna disconnection alarm – real-time monitoring
- Optional 3D sensor support for detecting accidents, towing, or parking collisions
- ImmoDALLAS – additional vehicle security for the client; the device activates the output if lack of authorisation is detected (DALLAS and RFID);
- Ignition signal detection via dedicated analogue input or main power voltage
- Possibility to connect Garmin navigation via RS-232 to RS-232-TTL signal converter
- Reading data from the CAN bus – supports over 750 vehicles